Ready-to-Move vs Under-Construction Flats in Pune: Which Costs Less and Carries Less Risk?
Choosing between a flat you can move into and one that is still being built is mostly a trade: a lower price today against more risk later. In Pune that trade has sharpened. Knight Frank's H1 2026 data shows new launches rising 17% year on year while unsold inventory grew 19%, so buyers now have plenty of both kinds of stock to compare. The RBI also raised the repo rate to 5.50% in October 2026, adding another factor for buyers to consider when comparing the cost of buying now versus waiting.
This guide is for first-time and upgrading buyers in Pune. It explains where the real cost differences sit, what RERA does and does not protect, and which checks to complete before you pay a booking amount.
Which is cheaper: ready-to-move or under-construction?
Neither is cheaper by default. An under-construction flat usually carries a lower quoted price, but GST applies to it and any delay adds rent or overlapping EMIs. A ready-to-move flat usually costs more upfront, carries no GST when the completion certificate was issued before you paid, and lets you see exactly what you are buying. Compare the total cost to move in, not the price per square foot.
Where do the costs actually differ?
Cost or risk factor
Ready-to-move
Under-construction
Quoted price
Often higher
Often lower
GST
None if the entire payment follows the completion certificate
5% (1% for affordable housing), without input tax credit
Stamp duty and registration
Payable
Payable
Payment pattern
Mostly upfront
Linked to construction stages
Cost of waiting
None
Rent and EMI overlap if possession slips
What you can verify
The finished flat, society and neighbours
Plans, approvals and the developer's track record
Choice of floor and layout
Limited to what is left
Wider at early stages
Stamp duty and registration charges apply to both, and the state assesses them with reference to its Annual Statement of Rates for the property. They do not separate the two options, so check the current combined rate for your property on the IGR Maharashtra calculator rather than relying on a rate card.
How much does GST change the comparison?
Since April 2019, under-construction residential flats outside the affordable segment attract an effective 5% GST without input tax credit, and affordable housing attracts 1%. Affordable housing is capped by carpet area and by a value limit of ₹45 lakh. GST does not apply where the entire consideration is received after the completion certificate (or first occupation).
On an illustrative ₹80 lakh flat, 5% GST is ₹4 lakh. A ready-to-move flat priced somewhat above an equivalent under-construction one can still have a similar or lower total move-in cost once GST and delay-related costs are considered.
One point is easy to miss. "Ready" in a brochure is not the same as a completion certificate in hand. The GST exemption depends on when the certificate was issued and when you paid, so ask for the date and the document itself.
What does a delay really cost?
Run a break-even before you decide. The numbers below are hypothetical, to show the method, and are not market data.
Illustrative item
Amount
Under-construction flat price
₹80 lakh
GST at 5%
₹4 lakh
Rent paid for 24 months at ₹30,000 a month
₹7.2 lakh
Total cost to move in
₹91.2 lakh
On this simple view, a comparable ready-to-move flat priced up to about ₹91 lakh would cost the same. The calculation ignores loan interest differences and any change in property value, and it changes if you do not pay rent, for example when you live with family. Use your own rent, timeline and quotes.
Interest rates add another variable. Loans for under-construction flats are typically disbursed in stages, and floating rates can move while you wait. Offers from multiple banks and housing finance companies can help buyers compare financing options before committing.
What risks does each option carry?
Under-construction:
Possession can slip past the promised date.
The finished flat may differ from the sales presentation.
Approvals may be incomplete at the time of booking.
Market conditions and loan rates can change before possession.
Ready-to-move:
A higher upfront payment can strain savings.
Fewer choices of floor, facing or layout remain.
Defects or maintenance issues may show only after you move in.
An unfinished society, such as missing amenities or an incomplete occupancy certificate, can be labelled "ready".
What does RERA protect, and what does it not?
Under the Real Estate (Regulation and Development) Act, 2016, as explained in the housing ministry's FAQ:
A project must be registered before it is advertised, marketed or sold.
A promoter cannot take more than 10% of the cost as an advance without a registered agreement for sale.
70% of the money collected from buyers must go into a separate bank account used for construction and land cost.
If possession is delayed, a buyer who stays in the project is entitled to interest for each month of delay. A buyer who withdraws can claim a refund with interest.
A promoter is liable for structural and specified defects for five years after handover.
The limits matter too. RERA gives you a route to remedy, not a faster flat. A claim for delay interest follows the date promised in the agreement, so read that date carefully, and recovering money through a regulator takes time.
In Maharashtra, the regulator is MahaRERA. Its project search lists registered projects, so confirm the project is registered and note its declared completion date.
Which Pune authority issued the approvals?
Pune's planning sits with different bodies depending on location. Pune Municipal Corporation (PMC) and Pimpri Chinchwad Municipal Corporation (PCMC) cover their limits, while the Pune Metropolitan Region Development Authority (PMRDA) is the planning authority for 697 villages in the wider region and issues building permissions and occupancy certificates there. For a flat on the city's edges, confirm which authority approved the plan and issued, or will issue, the occupancy certificate.
For land, check the 7/12 extract or property card on the Maharashtra land records portal, and confirm the registered agreement through the sub-registrar process on IGR Maharashtra.
A checklist before you decide
Search the project on MahaRERA and note the registration number and declared completion date.
For a ready flat, ask for the completion and occupancy certificates, and the dates of each.
Ask whether GST is being charged and why.
Calculate total cost to move in, including GST, rent and loan interest.
Read the agreement for the possession date, delay-interest terms and payment stages.
Check the land record and the approving authority.
Visit the site, and for an under-construction project, compare actual progress with the stage you are being asked to pay for.
How can HomeVerse help?
HomeVerse by Hero FinCorp helps buyers in Pune explore homes, compare options and get guidance through the home-buying journey. Buyers can explore and connect with HomeVerse by Hero FinCorp without paying to search.
Frequently asked questions
Is ready-to-move always safer than under-construction?
Not always. It removes delay risk and lets you inspect the flat, but it can still have title, approval or maintenance issues. Verify the paperwork either way.
Do I pay GST on a ready-to-move flat in Pune?
Not where the entire consideration is received after the completion certificate is issued. Confirm the certificate date and your payment dates.
Is stamp duty different for ready and under-construction flats?
Stamp duty applies to both. Check the current combined rate and the Annual Statement of Rates value on IGR Maharashtra.
What if the builder delays possession in Pune?
If the project is registered with MahaRERA, you can claim interest for each month of delay or withdraw and seek a refund with interest. Read the agreement's possession date first.
Is an under-construction flat a better investment?
That depends on price, timeline and market conditions, which can change. Any gain is a possibility, not a promise, so judge it on total cost and your own plans.
Conclusion
The better option is the one with the lower total cost to move in and the risks you can verify. If you need a home soon or want certainty, a ready-to-move flat with clean certificates is easier to judge. If you can wait and can verify the developer, approvals and agreement, an under-construction flat may suit a tighter budget.
Explore Pune properties with HomeVerse by Hero FinCorp.
This article is for general information and does not constitute legal, financial or investment advice. Rules, rates and market conditions change. Please verify details with the relevant authority or a qualified professional before making a decision.